Setting Dasar Switch dengan Mode Access

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gambar.1

Berikut adalah Setting dasar Switch dengan Mode Access
kita buat di cisco tracer seperti gambar di atas.

Pertama, kita buat di Switch 1:
-buat database kasih nama Vlan 10: "A", Vlan 20: "B", Vlan 30: "C". (Lihat gambar.2)

gambar 2

- Lalu Setting Switch dengan Mode Access
fa 0/1, 0/4, 0/7 untuk  vlan 10

gambar.3

fa 0/2, 0/5, 0/8 untuk  vlan 20

gambar.4

fa 0/3, 0/6, 0/9 untuk  vlan 30

gambar.5

 Lakukan juga hal yang sama pada Switch 2 dan Switch 3

-Pada Switch 2
 DATABASE VLAN:

 Switch>en
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
  as VLAN database mode is being deprecated. Please consult user
  documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vlan 10 name A
VLAN 10 added:
    Name: A
Switch(vlan)#vlan 20 name B
VLAN 20 added:
    Name: B
Switch(vlan)#vlan 30 name C
VLAN 30 added:
    Name: C
Switch(vlan)#exi
APPLY completed.
Exiting....
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.




VLAN 10
Switch(config)#int fa 0/1
Switch(config-if)#swi
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#int fa 0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#int fa 0/7
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit

VLAN 20
Switch(config)#in fa 0/2
Switch(config-if)#sw
Switch(config-if)#switchport mo
Switch(config-if)#switchport mode ac
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#in fa 0/5
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#in fa 0/8
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#

VLAN 30
Switch(config)#int fa 0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#int fa 0/6
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#int fa 0/9
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit


- di Switch 3 :
Switch>en
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
  as VLAN database mode is being deprecated. Please consult user
  documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vlan 10 name A
VLAN 10 added:
    Name: A
Switch(vlan)#vlan 20 name B
VLAN 20 added:
    Name: B
Switch(vlan)#vlan 30 name C
VLAN 30 added:
    Name: C
Switch(vlan)#exit
APPLY completed.
Exiting....
   
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#int fa 0/1
Switch(config-if)#swi
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#int fa 0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#int fa 0/7
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#int fa 0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#int fa 0/5
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#int fa 0/8
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#int fa 0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#int fa 0/6
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#int fa 0/9
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit


- Oh iya jangan lupa masukkan ip pada setiap computer atau device:
kita memakai ip :
192.168.1.0  (di urutkan saja pada setiap device )